Commercial Lock and Hardware Installation in Austin, TX
New locks, repairs and replacements, plus mortise, IC-core, high-security, panic bars, and door closers for Austin businesses.
Licensed, insured and bonded, Texas #B18900401 · Mon to Sat, 7am to 10pm
Tell us about the door and we will call or text you back with a price.
Commercial Lock and Hardware Installation in Austin, TX
TXP Locksmith installs and replaces commercial locks and door hardware across Austin. That covers new storefronts and offices, worn locks that need replacing, and exit doors that need the right hardware for code requirements. A licensed technician comes to your business and installs or replaces the hardware there.
If the locks are fine and only the keys need changing, that is commercial rekeying and master keys in Austin. To run a door on cards or codes instead, we install access control and keyless entry. It is one part of our locksmith work across Austin, and everything here is the physical hardware, from the cylinder to the closer.
- New commercial locks for entry, storefront, and interior doors
- Repairs and full replacements for worn or damaged hardware
- Mortise, IC-core, and high-security locks
- Panic bars, exit devices, and fire-rated exit hardware
- Door closers and ADA lever handles
- Licensed, insured and bonded, Texas #B18900401
Need work on your commercial locks in Austin?
Licensed TX #B18900401 · Mon to Sat, 7am to 10pm
Commercial Lock Installation in Austin, TX
Need a new lock on a commercial door in Austin, or not sure what hardware the door should have? We install deadbolts, storefront locks, lever sets, and keypad locks, and we check the door and frame before choosing the hardware. We fit the lock built for each door, a storefront cylinder on aluminum and glass, a heavier deadbolt or lever on a main entry.
We install commercial locks on new and existing doors. The technician checks the fit, aligns the lock and latch with the frame, and tests the door before leaving. If the existing hardware can stay, we tell you. If the door needs a different lock, we explain what fits and why before installing it.
- New commercial deadbolts, fitted and aligned
- Storefront lock installation for aluminum and glass
- Heavy-duty lever sets for all-day traffic
- Keypad and code entry for interior doors
- Weak factory locks replaced with commercial hardware
- The right lock chosen for each opening
Commercial Lock Repair and Replacement in Austin, TX
Not every commercial lock problem needs a full replacement. Call us when the lock body has worked loose in the door, the key fights you, or the latch no longer lines up with the strike. When the rest of the hardware is still sound, we repair or replace the worn part instead of changing the whole lock.
We recommend replacement when a lock is too worn or damaged to repair, including after forced entry has damaged the lock, strike, or frame, or when older hardware is no longer holding up. We tell you whether the lock can be repaired or needs replacing, explain why, and quote the work before starting.
- Worn cylinders, latches, and springs swapped out
- Doors brought back into proper alignment
- Locks and strikes secured after a break-in attempt
- One part replaced instead of the whole lock
- Full replacement once a lock is past repair
- A clear repair-or-replace call, priced up front
Mortise and IC-Core Locks in Austin, TX
Mortise locks are common on busy commercial doors, including storefront entries, office corridors, shared building entrances, and doors that are opened all day. The lock body sets into the edge of the door, with the cylinder, lever, and trim working around it. We install new mortise locks and repair existing ones when the hardware can still be used.
Interchangeable-core locks, or IC-core, use a removable core, so the core can be changed without taking the whole lock off the door. We install IC-core locks and cylinders for businesses that want future key changes to be simpler, while the rekeying itself is handled from the commercial locksmith page.
- Mortise lock installation on new commercial doors
- Existing mortise hardware rebuilt when it can be saved
- IC-core hardware for quick future key swaps
- Suited to storefronts, corridors, and shared entries
- Fits aluminum storefront and solid doors
- Cores and cylinders matched to the opening
High-Security Commercial Locks in Austin, TX
Some doors need tighter key control or stronger lock hardware than the rest of the building. We can look at the doors with you and tell you where high-security locks make sense. That may be a server room, equipment room, management office, cash office, or another door where you do not want uncontrolled key copies. High-security cylinders are designed to resist picking, drilling, and bumping.
Restricted key systems also give you tighter control over who can order copies. We install high-security hardware from makers like Medeco and Mul-T-Lock on doors that need it, while standard commercial locks can stay on the rest of the building.
- High-security cylinders on your most sensitive doors
- Pick-, drill-, and bump-resistant hardware
- Restricted, patented keys you control the copies of
- Server rooms, equipment rooms, and management offices
- Medeco, Mul-T-Lock, and comparable makers
- The rest of the building left on standard locks
Panic Bars and Exit Devices in Austin, TX
Restaurants, bars, event spaces, schools, and some retail buildings may need panic hardware on designated exit doors, depending on the building and code requirements. A panic bar lets people push the door open from the inside in an emergency, and the device needs to release properly every time it is used.
We install panic bars and exit devices and match the device to the door. That may be a single glass storefront, a pair of doors with vertical rod hardware, or a fire-rated exit. We fit rim, mortise, and vertical rod devices, plus electrified or alarmed exit hardware where a door ties into an alarm or an access control system. We repair worn exit devices when the hardware can be saved and replace them when it cannot.
- Panic bar and exit device installation
- Rim, mortise, and vertical-rod exit devices
- Fire-rated, alarmed, and electrified hardware
- Von Duprin and Detex exit devices
- Single storefront doors to double fire exits
- Worn exit hardware repaired or replaced
Door Closers and Commercial Door Hardware in Austin, TX
A door closer brings the door back to the frame after someone passes through. We install and adjust commercial door closers, size them to the door, and set the sweep and latch speed so the door shuts and latches without slamming.
We also install the other hardware around the door. That includes commercial lever sets and handles for busy doors, ADA-compliant lever hardware, and the strikes and thresholds used with the opening. When a door has to meet code or pass an inspection, we change the hardware it needs and set it up to pass.
- Commercial door closer installation and adjustment
- Closer speed and latch set to the door
- ADA lever handles for push-open access
- Lever sets and handlesets for heavy traffic
- Strikes, thresholds, and entry trim
- Hardware set up to pass inspection
Get Commercial Locks and Hardware Installed in Austin
Need locks on a new Austin business, replacement hardware on a door that has worn out, or new panic hardware or closers on an exit door? TXP Locksmith installs commercial locks, mortise and high-security hardware, panic bars, and door closers across Austin. Tell us which doors need work and a licensed technician will handle the installation.
Areas We Cover Across Austin
Business Districts
- Downtown Austin
- The Domain
- East Austin
- South Congress
- St. Elmo
- Montopolis
Commercial Corridors
- I-35
- MoPac (Loop 1)
- US-183
- Ben White (SH-71)
- Burnet Road
- Airport Boulevard
Industrial & Nearby
- Round Rock
- Cedar Park
- Pflugerville
- Del Valle
- Kyle
- Buda
ZIP Codes
- 78701
- 78702
- 78741
- 78744
- 78745
- 78758
Frequently Asked Questions
Do our exit doors need panic bars in Austin?
It depends on how the building is used, how many people it holds, and the requirements for that exit. Restaurants, bars, event spaces, and other higher-occupancy properties may require panic hardware. We can check the doors and install the right exit devices where they are needed.
Can TXP Locksmith match new commercial locks to the keys we already use?
Often, yes. If the existing and new locks are compatible, we can key them alike so your current key works with the new hardware. If they cannot be matched, we explain the options before installing anything.
What is the difference between a mortise lock and a standard commercial door lock?
A mortise lock has a lock body installed inside the edge of the door. A standard cylindrical or bored lock mounts through holes in the door. We install both and can tell you which type fits the door and how it is used.
Can TXP Locksmith install or adjust a door closer that is not closing properly?
Yes. We install, replace, and adjust commercial door closers in Austin. If a door is slamming, closing too slowly, or not latching when it shuts, we check the closer and door first and tell you what needs adjustment or replacement.
Can a commercial lock be repaired, or does the whole lock have to be replaced?
It depends on what failed. A worn cylinder, latch, lever, or other part can often be repaired or replaced without changing the whole lock. If the hardware is badly worn or damaged, we can replace the lock instead.
Will you install commercial door hardware on just one or two doors in Austin?
Yes. We take smaller jobs as well as larger installations. That could be one storefront lock, an IC-core or high-security cylinder on a restricted door, a panic bar on an exit, or a closer that needs replacing.
