Commercial Lock and Hardware Installation in San Marcos, TX
Commercial lock installation, repair, and replacement for San Marcos businesses, including mortise and IC-core locks, high-security hardware, panic bars, and door closers.
Licensed, insured and bonded, Texas #B18900401 · Mon to Sat, 7am to 10pm
Tell us about the door and we will call or text you back with a price.
Commercial Lock and Hardware Installation in San Marcos, TX
TXP Locksmith installs and repairs commercial locks and door hardware across San Marcos. We work on storefront locks, commercial deadbolts and lever sets, mortise locks, IC-core cylinders, high-security locks, panic bars, exit devices, and door closers.
You may be opening a new business, replacing a lock that no longer works properly, or dealing with a door that will not latch or close. We check the door and the hardware already on it, explain what the job needs, and give you the price before we start.
If the locks are working and you only need the keys changed, see our commercial rekeying and master key services in San Marcos.
- Commercial lock installation, repair, and replacement
- Storefront locks, deadbolts, and commercial lever sets
- Mortise locks and IC-core cylinders
- High-security locks and restricted key systems
- Panic bars and commercial exit devices
- Door closers and related commercial door hardware
- Licensed, insured and bonded, Texas #B18900401
Need work on your commercial locks in San Marcos?
Licensed TX #B18900401 · Mon to Sat, 7am to 10pm
Commercial Lock Installation in San Marcos, TX
TXP Locksmith installs commercial locks on new and existing business doors in San Marcos. Around Downtown and The Square, that often means aluminum storefront doors with narrow-stile hardware. Offices, warehouses, and commercial suites may use deadbolts, lever sets, or keypad locks instead.
Not sure which commercial lock fits the door you have? We check the door material, frame, existing cutouts, and how the entrance is used before installing anything. The latch or bolt also has to line up correctly with the strike, so we test the complete opening when the installation is finished.
- Commercial deadbolt installation
- Storefront locks for aluminum and glass doors
- Commercial lever sets and handles
- Keypad locks for offices and stockrooms
- New locks installed on existing commercial doors
- Latch, bolt, and strike alignment
Commercial Lock Repair and Replacement in San Marcos, TX
A commercial lock can start giving you trouble long before it stops working altogether. The key may become difficult to turn, the lever may feel loose, or you may have to pull the door toward you before the latch catches.
We handle commercial lock repair in San Marcos for worn cylinders, latches, levers, strikes, and other lock parts. If one part has failed and the rest of the hardware is sound, we repair what is needed. A lock that is badly worn, damaged after forced entry, or no longer secure may need to be replaced.
- Commercial lock repair and replacement
- Worn or damaged cylinders
- Loose levers and lock hardware
- Latches that no longer catch the strike
- Lock and strike damage after forced entry
- Full commercial lock replacement when needed
Mortise and IC-Core Lock Installation in San Marcos, TX
Many commercial doors already have mortise hardware, especially older storefront and shared-entry doors around Downtown San Marcos. If the mortise lock body is still in good condition, we can often repair or replace the worn cylinder, latch, lever, or trim without removing everything. We also install complete mortise locks on doors that need new hardware.
For businesses where employees or tenants change regularly, we also install IC-core locks and cylinders. The core can be removed with the proper control key without taking the complete lock off the door. That makes IC-core hardware useful for offices, commercial suites, and multi-tenant properties where the keying may need to change again.
The actual rekeying and master-key setup is handled through our San Marcos commercial locksmith service.
- Commercial mortise lock installation
- Mortise lock repair and replacement
- Mortise cylinders, latches, levers, and trim
- IC-core lock and cylinder installation
- Interchangeable cores for commercial doors
- IC-core hardware for offices and multi-tenant properties
High-Security Commercial Lock Installation in San Marcos, TX
Do you need tighter control over who can make copies of your business keys? A restricted high-security key system limits unauthorized duplication while giving you stronger commercial lock hardware at the door.
TXP Locksmith installs high-security commercial locks in San Marcos, including Medeco, Mul-T-Lock, and comparable cylinders. These locks offer greater resistance to picking, drilling, and bumping, while restricted keys can only be duplicated through the authorized system.
You do not have to change every lock in the building. High-security cylinders can be used on server rooms, cash offices, records rooms, or other doors where you want stronger key control. We can also add compatible cylinders to an existing restricted-key system.
- High-security commercial lock installation
- Medeco and Mul-T-Lock cylinders
- Restricted key systems
- Controlled key duplication
- Pick-, drill-, and bump-resistant cylinders
- High-security cylinders added to compatible existing systems
Panic Bar and Exit Device Installation in San Marcos, TX
Does the panic bar push down but the door still sticks? Maybe the door opens but does not latch again when it closes. We repair panic bars and commercial exit devices when the latch, strike, bar, or vertical-rod hardware stops working properly.
TXP Locksmith also handles panic bar installation in San Marcos for restaurants, retail stores, offices, and other commercial properties. We work with rim, mortise, and vertical-rod exit devices, along with fire-rated, alarmed, and electrified hardware where the door calls for it. Around The Square and the Texas State area, we also service existing exit hardware on busy commercial doors that gets used throughout the day.
- Panic bar installation and repair
- Commercial exit device installation
- Rim, mortise, and vertical-rod devices
- Fire-rated and alarmed exit hardware
- Electrified exit devices
- Von Duprin, Detex, and similar commercial hardware
Commercial Door Closer Installation and Repair in San Marcos, TX
Does your commercial door slam shut or fail to close all the way? The closer may need adjustment, but that does not always mean it needs replacing. We check how the door moves, whether it reaches the latch, and the condition of the closer before recommending new hardware.
TXP Locksmith installs, repairs, and adjusts commercial door closers in San Marcos. We set the sweep and latch speed where the closer allows it and replace leaking, damaged, or failed units. We also work on commercial lever sets, strikes, thresholds, and ADA-compatible lever hardware around the same door.
Businesses along I-35, Springtown, and other busy commercial areas call us for doors that get constant use and no longer close or latch the way they should.
- Commercial door closer installation
- Door closer repair and adjustment
- Slamming doors and doors that will not close fully
- Sweep and latch-speed adjustment
- Commercial lever sets and handles
- Strikes and thresholds
- ADA-compatible commercial door hardware
Get Commercial Locks and Hardware Installed in San Marcos
Need a commercial lock installed, an exit device repaired, or a door closer that actually shuts the door properly? Call TXP Locksmith and tell us what is happening at the door. We come to your San Marcos business, check the hardware, and give you the price before the work begins.
Areas We Cover Across San Marcos
Business Districts
- Downtown / The Square
- Texas State campus area
- San Marcos Premium Outlets
- Springtown
- Blanco Gardens
Commercial Corridors
- I-35
- Aquarena Springs Drive
- Hopkins Street
- Guadalupe Street
- RR-12
Nearby Towns
- Kyle
- Buda
- Wimberley
- Martindale
- Maxwell
ZIP Codes & Nearby Service
- 78666 – San Marcos
- 78667 – San Marcos PO Boxes
- 78640 – Kyle area
- 78656 – Maxwell area
Frequently Asked Questions
Can TXP Locksmith install a new lock on an aluminum storefront door in San Marcos?
Yes. We install commercial storefront locks on aluminum and glass doors across San Marcos. We check the existing cutout, cylinder, latch, and frame first so the new hardware fits the door you already have.
Why does our office door lock only when we pull the door toward us?
The lock itself may be fine. A shifted door, worn latch, or misaligned strike can keep it from catching properly. TXP Locksmith checks the lock and door together before recommending replacement.
Can TXP Locksmith repair the mortise locks already in our building?
Often, yes. If the mortise case is still usable, we may be able to replace a worn cylinder, latch, lever, or trim and keep the existing lock. We also install new mortise locks when the old hardware cannot be repaired.
Are IC-core locks a good choice for a San Marcos property with changing tenants?
They can be. The removable core can be changed without taking the complete lock off the door, which is useful for commercial suites and multi-tenant properties where tenants or key holders change regularly.
Can we install high-security locks on only a few doors in our San Marcos business?
Yes. High-security cylinders can go only on the doors where you want stronger hardware or tighter key control. You do not have to replace every commercial lock in the building.
Can TXP Locksmith repair a panic bar that opens the door but will not latch again?
Yes. The problem may be in the exit device, strike, closer, door alignment, or vertical rods. We check the complete opening and repair or adjust the part causing the problem.
Does a commercial door closer have to be replaced if the door keeps slamming?
Not always. The closer may only need adjustment. We check its condition and the way the door closes first. If the closer is leaking, damaged, or no longer controlling the door, we replace it.
